Each storage location in a warehouse is assigned a unique address. This includes both fixed storage locations, such as a portion of a shelf and mobile locations such as the forks of a lift truck. Storage locations are expensive because they represent space, with consequent costs of
rent, heating and/or air-conditioning, security, and so on. In addition, storage locations are typically within specialized equipment, such as shelving or flow rack, which are a capital cost. These costs impel us to use storage space as efficiently as possible.
There are two main strategies used in storing product. The simplest is dedicated storage, in which each location is reserved for an assigned product and only that prod- uct may be stored there. Because the locations of products do not change, more popular items can be stored in more convenient locations and workers can learn the layout, all of which makes order-picking more efficient.
The problem with dedicated storage is that it does not use space efficiently. This can be seen by
tracking the amount of inventory in a given location. If we plot the inventory level, measured for
example by volume, we would see a sawtooth shape such as in Figure 2.5 (which represents an
idealization of the inventory process.) In one cycle the storage location is initially filled but empties as product is withdrawn to send to customers. As a result, on average this storage location is half empty.
Figure 2.5: An idealization of how the inventory level at a location changes over time
A warehouse may have thousands or tens-of-thousands of storage locations. If using dedicated storage, each will have an assigned product. Each product may have a different replenishment cycle and so, upon entering such a warehouse, one expects to see many storage locations that are nearly empty, many that are half-full, and many that are nearly full. On average the storage capacity is only about 50% utilized.
To improve on this, one can use a strategy of shared storage. The idea here is to assign a product
to more than one storage location. When one location becomes empty, it is available for reassignment, perhaps to a different product. This space then can be filled again, rather than waiting until the original product is replenished (presumably when the last of the warehouse supply has been exhausted). The more storage locations over which a product is distributed, the less product in each location, and so the sooner one of those locations is emptied and the sooner that space is recycled. Therefore we expect better utilization of space when shared storage is used.
Unfortunately, shared storage also has some disadvantages. Most immediately, the locations of
products will change over time as locations are emptied and restocked with other products. This
means that workers cannot learn locations and so must be directed to locations by a warehouse
management (software) system. Another disadvantage is that it becomes more time-consuming to put away newly received product because it has to be taken to more locations. There can be other, social complications as well. For example, imagine an order picker who has been directed to the other side of the warehouse to pull a product for a customer. That order picker may be
tempted to pick the product from a more convenient location, thus creating discrepancies between book and physical inventory at two locations. For these reasons, shared storage requires greater software support and also more disciplined warehouse processes.
Shared storage is generally more complicated to manage because it introduces many possible trade-offs. In particular, one can manage the trade-off between space and time (labor) on an activity-by-activity basis. For example, one can retrieve product from the least-filled location (to empty and recycle that location as soon as possible) or from the most convenient location (to
save labor). Similarly, one can replenish product to the most nearly empty location to fill that
empty space or to the most convenient location to save labor time.
How much improvement in space utilization is possible with shared storage? Consider a product that is requested at a constant rate, as in our idealization of Figure 2.5. Suppose we hold two weeks supply of this product. If we store it in two locations of equal size and direct all order-picking to only one location then after one week, the first location will be emptied and available for reassignment. After the second week the second location will be emptied and available for reassignment. During the first week, the first location was half full on average and the second location was completely full, so that average space utilization was 75%. During the second week the second location was half-full, for an average space utilization of 50%, and the space utilization over the two weeks was 62.5%. More improvement is possible if a product is stored in more locations, though the improvement diminishes and, moreover, the practical problems of management increase.
More generally we can argue as follows. Assume for convenience that demand is constant, the SKU has been stored in k locations of identical size, and all picks are from a single active pick
location until that location is exhausted. Then the inventory cycle may be imagined as consisting
of k periods, each devoted to a particular pick location, as in Figure 2.6. The average space utilization in period i is
and the average utilization over all k periods is
Figure 2.7 shows how the space utilization of storing a SKU in more locations increases but with diminishing returns.
Interestingly, there is a slight sampling bias if one were to examine space utilization directly by
taking a census within the warehouse. This is the subject of Exercise 2.7 and it suggests that you
will tend to measure slightly smaller values than predicted by Expression 2.1.
In practice, a strategy of shared storage is typically used in the bulk storage areas, where most of the volume of product is held on pallets. Dedicated storage may be used in the most active picking areas, which are much smaller than the bulk storage. Thus one gets efficient use of most of the space (bulk storage) with labor benefits where it matters most (active picking areas).
There are also hybrid schemes in which regions are reserved for groups of SKUs, but locations are not reserved. For example, an aisle might be reserved for SKUs of one type or from one vendor, but within that aisle, space would be shared amongst the SKUs.
Figure 2.6: Use of k locations to hold product under a policy of shared storage. The
step function represents the space devoted to holding inventory.
Figure 2.7: Under shared storage, space utilization increases with additional storage locations, but at a diminishing rate.
2.4
Storage:“Dedicated”vs “Shared”
存储:专用vs共享
Each storage location in a warehouse is assigned a unique address. This includes both fixed storage locations, such as a portion of a shelf and mobile locations such as the forks of a lift truck. Storage locations are expensive because they represent space, with consequent costs of rent, heating and/or air-conditioning, security, and so on. In addition, storage locations are typically within specialized equipment, such as shelving or flow rack, which are a capital cost. These costs impel us to use storage space as efficiently as possible.
仓库中的每个存储位置被分配一个唯一的地址。这包括固定的存储位置(如货架的一部分)和移动的位置(如叉车的叉)。存储位置很昂贵,因为它们代表空间,随之而来的是租金、供暖、空调、安全等成本。此外,存储位置通常在专用的设备内,如钢制货架或流动式货架,这是一个资本成本。这些成本促使我们尽可能有效地使用存储空间。
There are two main strategies used in storing product. The simplest is dedicated storage, in which each location is reserved for an assigned product and only that product may be stored there. Because the locations of products do not change, more popular items can be stored in more convenient locations and workers can learn the layout, all of which makes order-picking more efficient.
存储产品有两种主要策略。最简单的是专用存储(一位一品),每个存储位置是为指定的产品保留的,只有这种产品可存储在那里。因为产品的位置不会改变,畅销品可以储存在更便捷的位置,工作人员不断地熟悉产品的布局,所有这些都使得订单的拣选更有效率。
The problem with dedicated storage is that it does not use space efficiently. This can be seen by tracking the amount of inventory in a given location. If we plot the inventory level, measured for example by volume, we would see a sawtooth shape such as in Figure 2.5 (which represents an idealization of the inventory process.) In one cycle the storage location is initially filled but empties as product is withdrawn to send to customers. As a result, on average this storage location is half empty.
专用存储的问题是它不能有效地使用空间。这可以通过跟踪给定位置的库存数量来看到。如果我们绘制库存水平,例如通过体积来计量,我们会看到如图2.5所示的锯齿形(它代表了理想化的库存过程)。在一个周期中,存储位置最初被填满,但当产品被拣出并发送给客户时,存储位置就空了。因此,平均起来这个存储位置有一半是空的。
Figure 2.5: An idealization of how the inventory level at a location changes over time
一个库位的库存水平随时间变化的理想模型
A warehouse may have thousands or tens-of-thousands of storage locations. If using dedicated storage, each will have an assigned product. Each product may have a different replenishment cycle and so, upon entering such a warehouse, one expects to see many storage locations that are nearly empty, many that are half-full, and many that are nearly full. On average the storage capacity is only about 50% utilized.
一个仓库可能有成千上万的存储位置。如果使用专用存储,每个库位将有一个指定的产品。每一种产品都可能有不同的补货周期,因此,在进入这样的仓库时,人们预期会看到许多存储位置几乎是空的,许多是半空的,还有许多是接近满的。平均而言,存储容量仅被利用了约50%。
To improve on this, one can use a strategy of shared storage. The idea here is to assign a product to more than one storage location. When one location becomes empty, it is available for reassignment, perhaps to a different product. This space then can be filled again, rather than waiting until the original product is replenished (presumably when the last of the warehouse supply has been exhausted). The more storage locations over which a product is distributed, the less product in each location, and so the sooner one of those locations is emptied and the sooner that space is recycled. Therefore we expect better utilization of space when shared storage is used.
要改进这一点,可以使用共享存储策略(一位多品&随机存储)。这里的想法是将产品分配到多个存储位置。当一个库位变空时,可以将其重新分配,可能是分配到不同的产品,然后可以再次填充该库位,而不是等待原指定产品补货到仓(大概是当该产品的库存已经耗尽时)。产品分布的存储位置越多,每个存储位置的产品就越少,因此,其中一个存储位置越早被清空,这些空间就越早被回收利用。因此,我们期望在使用共享存储时能够更好地利用仓库的存储空间。
这家伙很懒,还没有设置简介