大董知识库-物流导师

"e" 搜索结果,为您找到约 10312 条结果

felix 发起了提问 2025-06-12 15:40 商超物流: 问答拆零整箱整托的英文术语

broken case, full case and pallet picking,; 关注问题 1  0  0评论

felix 发起了提问 2025-03-26 07:37 现场管理: 问答 Mclane仓库

仓库; 关注问题 1  0  0评论

felix 发起了提问 2025-01-24 14:36: 问答 AI有望替代知识社区吗？

以下是Deepseek的关于巧固架的回答，放到知库群里请大家判断一下是否准确，由此引发了关于AI是否能够替代知识社区的讨论。巧固架的优缺点如下：优点：结构稳固：采用高强度钢材，承重能力强，稳定性高。空间利用率高：多层设计，充分利用垂直空间，适合存储大量货物。灵活性强：可根据需求调整层高和布局，适应不同尺寸和重量的货物。安装便捷：模块化设计，安装和拆卸简便，便于调整和搬迁。耐用性高：表面经过防腐处理，使用寿命长，适合多种环境。安全性好：配备防滑、防倾倒设计，减少安全隐患。缺点：成本较高：初期投资较大，尤其对小型企业可能构成负担。维护需求：需定期检查和维护，防止锈蚀和结构松动。空间限制：需要一定高度和面积，空间有限时可能不适用。安装复杂性：虽然模块化设计便于安装，但仍需专业人员操作，增加时间和人力成本。总结：巧固架适合需要高效存储的企业，但需考虑初期投资和维护成本。李鑫总：像这种文本型的总结，无非就是网上的信息的缝合怪，来源也无法保证是正确的，缝合的再好看也只是参考。知识社区的价值在于人，人是有实践经历地，人只要没有利害关系，做出的回复就会靠谱地多。顺便说下，如果AI的结论能提供一张实际使用该产品的真实案例和联系方式，能够让查询的人做真实地调查反馈，可信度和价值就极大提升了。但该产品的厂家是不敢的，AI的价值就是它能，它敢，而且是真实地。在没有互联网之前，信息差在于，无法得到信息。当有...; 关注问题 1  0  0评论

felix 发起了提问 2025-01-17 14:42 效率与KPI: 问答 2024年DC指标报告

=92% 与之前的一流性能分类没有变化，表明尽管对指标的关注减少，但表现保持一致。 |"]]],["p",{},["span",{"data-type":"text"},["span",{"data-type":"leaf"},"| 从码头到库存的周期时间 | 货物到达与放入库存管理系统记录之间的时间。 | =99.2% 一流性能从99.5%略微下降到99.2%，表明仓库仍面临挑战。 |"]]], ["p",{},["span",{"data-type":"text"},["span",{"data-type":"leaf"},"| 年度劳动力流失率 | 永久员工被替换的比率，不包括临时工或季节性劳动力。 | =92% 与之前的一流性能分类没有变化，表明尽管对指标的关注减少，但表现保持一致。 |"]]],["p",{},["span",{"data-type":"text"},["span" ,{"data-type":"leaf"},"| 从码头到库存的周期时间 | 货物到达与放入库存管理系统记录之间的时间。 | =99.2% 一流性能从99.5%略微下降到99.2%，表明仓库仍面临挑战。 |"]]],["p",{},["span",{"data-type":"text"},["span",{"data-type":"leaf"},"| 年度劳动力流失率 | 永久员工被替换的比率，不...; 关注问题 1  0  0评论

felix 发起了提问 2024-11-06 16:20 仓储与配送科学: 问答 7.1.2 Quantities to store forward

The “minimum practical number of locations”, which we shall write as , is deter(scheduled chunk of Another reason to store more than one pallet of a SKU forward is to avoid congesSuppose that, to avoid stockout, SKU forward if any and to avoid congestion it must occupy at least two locations. Then if the forward pick area is the ground floor of 1-deep pallet rack, holding one pallet of SKU i i pallets/pallet per location , ）= 3 area is 2-deep pallet flow rack, SKU i 3 2 locations, which ...; 关注问题 1  0  0评论

felix 发起了提问 2024-11-06 16:12 仓储与配送科学: 问答 7.1.1 Operating protocols

Assumption 7.1 All locations in the forward area are reserved order-picking. When storage is reserved, it can be assigned based on activity rather than mere availability, and order-pickers can mo re easily learn where product is. even though reserved storage is not the most space-efficient, this does not cost much because Assumption 7.2 At any time each SKU has a single location sens e to pick full-pallet quantities from reserve: If we were to take a full pallet from the forward area, it must be replenished from reserve, and this entails three trips, one to retrieve the pallet fro...; 关注问题 1  0  0评论

felix 发起了提问 2024-11-06 16:08 仓储与配送科学: 问答 7.1 Layout for a forward area

7.27.3can walk up and down the aisle picking cartons, labeling them with destination, and placing them on the conveyor, which can take them to shipping。Publication 529, March 1985, p 8–17). cations f rom which it is convenient to pick from are restocked from a or pallet locations and the reserve includes all higher locations. In the second case, the forward pick area includes all pallet locations in the pallet flow rack and the reserve is may be a separate area of the warehouse, perhaps with very high pallet rack (not shown in the figure)....; 关注问题 1  0  0评论

felix 发起了提问 2024-11-06 16:00 仓储与配送科学: 问答 7 Layout of a carton-pick-from-pallet area

or can be handled by one person; • is a unit-load process, but picking is not, which creates additional complexities in our models of space and labor. One consequence is that it becomes much more dif ficult to measure the convenience of an individual location; but it is still possible to make broad distinctions in convenience. A particularly convenient region that is replenished from within the wa rehouse is called a fast-pick areaThe material flow on which we concentrate here is that of Figure ...; 关注问题 1  0  0评论

felix 发起了提问 2024-11-06 11:28 仓储与配送科学: 问答 6.5 Questions

For each of the following, explain whether the description makes the 1. A pallet of this SKU is fragile. 4. A pallet of this SKU is strong and square. Question 6.3. doors.explain why it is almo st always preferable to orient aisles parallel to a Question 6.6. Figure : Should a cross-aisle be located close to receiving/shipping Question 6.7 )6.15all locations are equally likely to b e used, and that both receiving and shipping are at the bottom of the figure. What if receiving and shipping are on opposite sides? How would your answers change if the challenge were to locate severa...; 关注问题 1  0  0评论

felix 发起了提问 2024-11-06 11:12 仓储与配送科学: 问答 6.4 More

special types of rack such as pallet flow rack support FIFO; but otherwise FIFO can be and light, such as a pallet of printers, which can be 7 feet high (2.1 meters); or low and heavy, such as a pallet of software or printed documentation. The ability to floorstack can be seasonal. Corrugated cardboard, the paper prodare relatively dry, cannot be floorstacked during the summers, which are hot and humid....; 关注问题 1  0  0评论

felix 发起了提问 2024-11-06 11:09 仓储与配送科学: 问答 6.3 Summary

Arrange your warehouse so that the convenience of storage positions matches • venient positions.and; 关注问题 1  0  0评论

felix 发起了提问 2024-11-06 11:05 仓储与配送科学: 问答 6.2.4 Aisle configuration

Cross-aisles6.12storage locations. And if receiving and shipping are on the same side of the cross-aisle, the near locations perhaps with orthogonal cross-aisles; but this need not always be the case. Kevin Gue of Auburn University and Russ Meller of the University of Arkansas [including some angled cross-aisles, as in Figure fishbone It is possi ble to take advantage of this more direct travel if most pallet movement ...; 关注问题 1  0  0评论

felix 发起了提问 2024-10-22 16:51 仓储与配送科学: 问答 6.2.3 Location of receiving and shipping

6.10 the middle of opposite sides of the warehouse. This is sometimes referred to as a flow-through Now imagine how the convenience of the storage locations changes if the ship ping improve, while the quality of the very If both receiving and shipping are on the 6.11in and out the same side of the warehouse, this is sometimes referred to as a Now the best storage locations, which are at the middle of the common receiving . Which layout is better? In this case, as with so many of the des...; 关注问题 1  0  0评论

felix 发起了提问 2024-10-22 16:26 仓储与配送科学: 问答 6.2.2 Reducing labor by careful product placement

There is unanimous agreement in industry that the “fastest-moving” SKUs should be stored in the most convenient locations. Unfortunately, both engineering literature and practice disagree on what these terms mean. To be precise each must be based on an explicitly model. First: What is a “convenient” location? Consider the warehouse of Figure &nb sp; Now each time a pallet is stored at a particular location, the following variable labor is associated a labor cost di i labor cost will be proportional to Figure 6...; 关注问题 1  0  0评论

felix 发起了提问 2024-10-18 15:28 仓储与配送科学: 问答仓储与配送科学-6.2.1 Reducing labor by dual-cycle operations

dead-headingto a storage location to get a pallet, but then travel productively to carry that pallet to shipping.single cyclepallet movements are either stows or retrievals, a forklift operating under single-cycle protocol dead-heads at least half the time, because it must constantly return empty to receiving to unload another pallet or else travel empty to retrieve another pallet for shipping, as in Figure with the pallet is reduced — this is the subject of the next section. Another way is to reduce deadheading by careful interleaving of put-aways and retrievals, so that after a put-away, the...; 关注问题 1  0  0评论

热门搜索